Call today 01279 879199
Avant South East Logo
South east

Cutting Bar S30

There are two models of cutting bars which mount on the side arms with S30 quick attach system (both on the mechanical & hydraulic side arm). They cannot be mounted on the attachment coupling plate of the loader.

The A430938 cutting bar is equipped with the same cutting blades and blade guides as the A35676 cutting bar. The frame and actuator mechanism are however stronger, which means the A430938 bar is optimized for hedge cutting and doesn’t work too well with hay because of the higher frame. There are wear plates at each end of the cutting bar, useful when working on paved and asphalt surfaces for instance.

The A434613 cutting bar with double knifes is a more precise hedge cutter and makes a cleaner cut thanks to the double knife design which cuts the branches by sawing them.

The mounting bracket of the cutting bars is pivoted and locked with a bolt, and can be turned manually in different positions. This gives the possibility to for instance cut the hedge horizontally,vertically and in different angles.The cutting bars are also equipped with a pressure relief valve which protects the unit if it hits an obstacle.

400, 500, 600, 700, 800 R & E series

  • Efficient and quick hedge cutter also for higher hedges
  • Cutting both horizontally and vertically thanks to pivoting mounting bracket
  • Two models
  • S30 attachment’s hydraulic hoses are connected to the side arm with Multi connector
Working width1500 mm1500 mm
Total width1600 mm1790 mm
Weight90 kg58 kg
Product noA430938A434613

The optional Opticontrol® is required on the loader.